Component testing procedure
COMPONENT TESTING PROCEDURE CHART
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Up/Down | 1 and 5 | Up | Closed circuit |
| 3 and 5 | Closed circuit | ||
| 3 and 5 | Down | Closed circuit | |
| 1 and 6 | Closed circuit | ||
| In/Out | 1 and 5 | In | Closed circuit |
| 3 and 7 | Closed circuit | ||
| 1 and 7 | Out | Closed circuit | |
| 2 and 5 | Closed circuit |