Common Specifications & Procedures
(MKT) COMMON SPECIFICATIONS & PROCEDURES
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | SPECIFICATIONS | ||
| Torque | SPECIFICATIONS | ||
| Auxiliary Air Conditioning | |||
| Service | HVAC - CLIMATE CONTROL SYSTEM - AUXILIARY CLIMATE CONTROL | ||
| Torque | HVAC - CLIMATE CONTROL SYSTEM - AUXILIARY CLIMATE CONTROL | ||
| Axle Nut/Hub Nut | |||
| Front Hub Nut | 258 Ft. Lb. (350 N.m) | ||
| Rear Hub Nut | 258 Ft. Lb. (350 N.m) | ||
| Battery | SPECIFICATIONS | ||
| Brakes | |||
| Bleeding Sequence | RR, LR, RF, LF BRAKE SYSTEM BLEEDING |
||
| Disc Brakes | |||
| Front | SPECIFICATIONS | ||
| Rear | SPECIFICATIONS | ||
| Charging | |||
| Generator | SPECIFICATIONS | ||
| Drive Belts | |||
| Adjustment | BELT TENSIONER --> | ||
| Belt Routing | ACCESSORY DRIVE BELT ROUTING | ||
| Engine Cooling | |||
| General Service Specifications | SPECIFICATIONS | ||
| Radiator Cap Pressure | 14 psi (96 kPa) | ||
| Thermostat R & I | THERMOSTAT | ||
| Water Pump R & I | COOLANT PUMP | ||
| Engine Mechanical | |||
| 3.5L GTDI | |||
| Compression | COMPRESSION TEST | ||
| Oil Pressure (minimum at 1, 500 RPM, engine at normal operating temperature) | 30 psi (207 kPa) | ||
| Overhaul | SPECIFICATIONS | ||
| Torque | SPECIFICATIONS | ||
| 3.7L (4V) | |||
| Compression | COMPRESSION TEST | ||
| Oil Pressure (minimum at 1, 500 RPM, engine at normal operating temperature) | 30 psi (207 kPa) | ||
| Overhaul | SPECIFICATIONS | ||
| Torque | SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate Torque | 59 Ft. Lbs. (80 Nm) | ||
| Fuel System | |||
| Fuel Filter Location | Lifetime fuel filter (serviced as part of the Fuel Pump module). | ||
| Fuel Filter R & I | FUEL PUMP MODULE | ||
| Pressure Release Procedure | FUEL SYSTEM PRESSURE RELEASE L | ||
| Pressure Specification | 65 psi (448 kPa) Constant pressure: Key ON Engine OFF (KOEO) and Key ON Engine Running (KOER) |
||
| Fuel Pressure Test Procedure | FUEL SYSTEM PRESSURE TEST | ||
| Ignition | |||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Ignition Wire Resistance and Routing | Engines have coil-on-plug ignition. | ||
| Spark Plugs | |||
| 3.5L GTDI | |||
| Type | Motorcraft CYSF-12F-3 | ||
| Gap | 0.032-0.038 In. (0.81-0.97 mm) | ||
| Torque | 133 INCH Lbs. (15 N.m) | ||
| 3.7L (4V) | |||
| Type | Motorcraft AYFS-22FM | ||
| Gap | 0.051-0.057 in (1.29-1.45 mm) | ||
| Torque | 133 INCH Lbs. (15 N.m) | ||
| Starting | |||
| Starter | SPECIFICATIONS | ||
| Wheel Alignment | |||
| Adjustment Specifications | SPECIFICATIONS | ||
| Torque | SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 100 Ft. Lbs. (135 N.m) | ||