Cruise-Control Module (C-CM) or bracket: Removal
WARNING: This page is about a different car, the 2013 Lincoln MKX and 2013 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
- With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
- Remove the front bumper cover. For additional information, refer to BUMPERS .
- Gently pry the C-CM away from the retaining studs.
- Disconnect the electrical connector.
- Inspect the C-CM grommets for any damage and install new grommets as necessary.
Bracket
- Remove the 4 bolts and the C-CM bracket assembly.