Normal Operation
When the steering column control switch (mounted directly to the Steering Column Control Module (SCCM)) is activated, the SCCM supplies voltage and ground to the applicable steering column tilt or telescoping motor to move the steering column to the desired position.
This pinpoint test is intended to diagnose the following:
- Fuse
- Wiring, terminals or connectors
- Steering column control switch
- Adjustable steering column tilt motor
- Steering column assembly
- SCCM
| DTC Description | Fault Trigger Conditions |
|---|---|
|
This DTC sets when the SCCM senses current flow to the adjustable steering column tilt motor is below a preset limit while the steering column control switch is activated. This may be caused by an open or high resistance in the adjustable steering column tilt motor circuits. |
|
This DTC sets when the SCCM senses current flow to the adjustable steering column tilt motor is above a preset limit while the steering column control switch is activated. This may be caused by a short to ground in the adjustable steering column tilt motor circuits. |
|
This DTC sets when the SCCM senses current flow to the adjustable steering column tilt motor is within a specific range but above a preset limit during self test. |
|
This DTC sets when the SCCM senses current flow to the adjustable steering column telescope motor is below a preset limit while the steering column control switch is activated. This may be caused by an open or high resistance in the adjustable steering column telescope motor circuits. |
|
This DTC sets when the SCCM senses current flow to the adjustable steering column telescope motor is above a preset limit while the steering column control switch is activated. This may be caused by a short to ground in the adjustable steering column telescope motor circuits. |
|
This DTC sets when the SCCM senses current flow to the adjustable steering column telescope motor is within a specific range but above a preset limit during on-demand self test. |