October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Component testing procedure

COMPONENTS TESTING PROCEDURE CHART

Circuit to test	Connect self-powered test light or ohmmeter to terminals	Move switch to these positions	A good switch will indicate
Interior lamps circuit	2 and 4	Dome defeat	Closed circuit
	2 and 4	Off	Open circuit
	4 and 5	Dome	Closed circuit
	4 and 5	Off	Open circuit
Illumination dimmer resistor	4 and 6	Rotate wheel	Ohmmeter will show smoothly increasing/decreasing resistance