LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2013 >> MKX FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Information System And Entertainment System >> Removal and Installation >> Front Controls/Display Interface Module (FCDIM) >> Removal and Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal and Installation

    NOTE: Module configuration is required when a new Front Control/Display Interface Module (FCDIM) is being installed.
  1. Upload the FCDIM configuration information to the scan tool. For additional information, refer to MODULE CONFIGURATION to carry out Programmable Module Installation (PMI).
  2. Remove the Front Controls Interface Module (FCIM) refer to Front Controls Interface Module (FCIM) .
  3. Remove the 4 screws and remove the FCDIM.
    • Disconnect the electrical connectors.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals