Network Message Chart: Run

To enter RUN mode, with the correct IA  key inside the vehicle, press the start/stop switch for a minimum of one second without pressing the brake pedal. Once the BCM  receives the message from the RFA  module that the correct IA  key is present inside the vehicle and the BCM  has detected the start/stop switch input without the BPP  input, the BCM  activates the internal RUN/ACC bus, the internal RUN/START bus, the RUN/ACC relay and the RUN/START relay. The BCM  also sends the ignition mode message to the other modules over the MS-CAN  and the HS-CAN  .

Once the ignition has entered RUN mode, the indicator in the start/stop switch illuminates and the module controlled indicators in the IPC  momentarily illuminate to prove they are functioning correctly. For IPC  prove out information, REFER to INSTRUMENTATION, MESSAGE CENTER, AND WARNING CHIMES .