| U0155:00 |
Lost Communication With Instrument Panel Cluster (IPC
) Control Module: No Sub Type Information |
GO to PINPOINT TEST V . |
| U0184:00 |
Lost Communication With Radio: No Sub Type Information |
GO to PINPOINT TEST X . |
| U0256:00 |
Lost Communication With Front Controls Interface Module "A": No Sub Type Information |
GO to PINPOINT TEST AB . |
| U201A:51 |
Control Module Main Calibration Data: Not Programmed |
REFER to
MODULE CONFIGURATION
. |
| U2100:00 |
Initial Configuration Not Complete: No Sub Type Information |
REFER to
MODULE CONFIGURATION
. |
| U2101:00 |
Control Module Configuration Incompatible: No Sub Type Information |
REFER to
MODULE CONFIGURATION
. |
| U3000:41 |
Control Module: General Checksum Failure |
CLEAR the DTCs. REPEAT the self-test. If DTC U3000:41 is still present, INSTALL a new Front Control/Display Interface Module (FCDIM). REFER to FRONT CONTROLS/DISPLAY INTERFACE MODULE (FCDIM) . REPEAT the self-test. |
| U3000:42 |
Control Module: General Memory Failure |
CLEAR the DTCs. REPEAT the self-test. If DTC U3000:42 is still present, INSTALL a new audio FCDIM
. REFER to FRONT CONTROLS/DISPLAY INTERFACE MODULE (FCDIM) . REPEAT the self-test. |
| U3003:16 |
Battery Voltage: Circuit Voltage Below Threshold |
GO to PINPOINT TEST AD . |
| U3003:17 |
Battery Voltage: Circuit Voltage Above Threshold |
GO to PINPOINT TEST AE . |