Removal and Installation

All 

1. NOTE: Module configuration is required when a new audio Digital Signal Processing (DSP) module is being installed.

   Upload the audio DSP  module configuration information to the scan tool. For additional information, refer to PROGRAMMABLE MODULE INSTALLATION (PMI) .

2. Remove the subwoofer speaker. For additional information, refer to SPEAKER - SUBWOOFER .
3. Disconnect the audio DSP  module electrical connectors.

   THX sound 

4. Remove the 4 screws and the audio DSP  module.

   Sony sound 

5. Remove the 3 screws the nut and the audio DSP  module.

   All 

6. To install, reverse the removal procedure.
   • Download the configuration information to the audio DSP  module. For additional information, refer to PROGRAMMABLE MODULE INSTALLATION (PMI) .