Pinpoint Test E : The Sod-R Does Not Respond To The Scan Tool Or Cannot Be Configured: Notes

Diagnostic Overview 

Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to Diagnostic Methods in Service Information for information about these practices.

Refer to VEHICLE EMERGENCY MESSAGING SYSTEM for schematic and connector information.

Normal Operation and Fault Conditions 

The SOD-R uses an address ground pin for configuration. The address ground is necessary so BLIS® or the CTA system can decipher between the SOD-R and the SOD-L during configuration. The SOD-R communicates over the MS-CAN.