Pinpoint Test AF : The Rear Gate Trunk Module (RGTM) Does Not Respond To The Diagnostic Scan Tool: Notes
WARNING: This page is about a different car, the 2016 Lincoln MKX. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Module Communications Network for schematic and connector information.
Refer to Power Liftgate for schematic and connector information.
Normal Operation and Fault Conditions
The RGTM communicates on the MS-CAN and communicates with the diagnostic scan tool through the HS-CAN2. Diagnostic messages are sent/received through the HS-CAN2 circuits at the DLC, and translated through the GWM to the MS-CAN.
Visual Inspection and Diagnostic Pre-checks
Verify BJB fuse 76 (30A) and BCM fuse 10 (5A) are OK.