Pinpoint Test H : The Direct Current/Direct Current (Dc/Dc) Converter Control Module Does Not Respond To The Diagnostic Scan Tool (China): Notes
WARNING: This page is about a different car, the 2016 Lincoln MKX. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Module Communications Network for schematic and connector information.
Refer to Auto-Start-Stop System for schematic and connector information.
Normal Operation and Fault Conditions
The Direct Current/Direct Current (DC/DC) Converter Control Module communicates on the HS-CAN1.
Visual Inspection and Diagnostic Pre-checks
Verify high current BJB fuse 3 (50A) and BJB fuse 23 (15A) are OK.