DTC U0416: Invalid Data Received from Vehicle Dynamics Control Module: Action

CARRY OUT a self-test of the VDM. If the diagnostic scan tool indicates the module is not responding, REFER to MODULE COMMUNICATIONS NETWORK to diagnose the network communication concern. If VDM DTCs are present, REFER to VEHICLE DYNAMIC SUSPENSION SYSTEM to diagnose the VDM system fault. If there are no DTCs in the VDM, SET the ignition to OFF. DISCONNECT and INSPECT all VDM electrical connectors and related in-line connectors for corrosion, bent pins, pushed-out pins and spread terminals. REPAIR as necessary.