Vehicles With: HARMAN Revel Ultima Audio System: APIM
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| B108E:01 | Display: General Electrical Failure | Go To PINPOINT TEST AI . |
| B108E:12 | Display: Circuit Short To Battery | Go To PINPOINT TEST AI |
| B108E:63 | Display: Circuit / Component Protection Time-Out | Go To PINPOINT TEST AI |
| B119F:01 | GPS Antenna: General Electrical Failure | For a SIRIUS Travel Link concern, GO to Pinpoint Test C For a navigation concern, Go To PINPOINT TEST AK For a compass concern, Go To PINPOINT TEST AM |
| B119F:13 | GPS Antenna: Circuit Open | For a SIRIUS Travel Link concern, GO to Pinpoint Test C For a navigation concern, Go To PINPOINT TEST AK For a compass concern, Go To PINPOINT TEST AM |
| B1252:11 | USB Port: Circuit Short To Ground | Go To PINPOINT TEST AC |
| B1252:13 | USB Port: Circuit Open | Go To PINPOINT TEST AC |
| B12B8:11 | USB Port #2: Circuit Short To Ground |
NOTE:
This DTC refers to USB port #2 on the APIM itself, which is not used. INSPECT the APIM USB port #2 for damage and REMOVE any debris.CLEAR the DTC.WAIT at least 10 seconds.REPEAT the APIM self-test.If DTC B12B8:11 is retrieved again, PERFORM the APIM Hardware Test. Refer to APIM HARDWARE TESTING
. |
| B14FD:11 | External Media Control Connectivity: Circuit Short To Ground | Go To PINPOINT TEST AC |
| B1D79:11 | Microphone Input: Circuit Short To Ground | Go To PINPOINT TEST AB . |
| B1D79:12 | Microphone Input: Circuit Short To Battery | Go To PINPOINT TEST AB |
| B1D79:13 | Microphone Input: Circuit Open | Go To PINPOINT TEST AB |
| C1001:01 | Vision System Camera: General Electrical Failure | REFER to: Parking Aid . See: The Rear Video Is Inoperative. |
| U0121:00 | Lost Communication With Anti-Lock Brake System (ABS) Control Module: No Sub Type Information | Go To PINPOINT TEST AR . |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | Go To PINPOINT TEST AS . |
| U0151:00 | Lost Communication With Restraints Control Module: No Sub Type Information | Go To PINPOINT TEST AU . |
| U0155:00 | Lost Communication With Instrument Panel Cluster IPC Control Module: No Sub Type Information | Go To PINPOINT TEST AV . |
| U0159:00 | Lost Communication With Parking Assist Control Module "A": No Sub Type Information | Go To PINPOINT TEST AW . |
| U0162:00 | Lost Communication With Navigation Display Module: No Sub Type Information | Go To PINPOINT TEST AI . |
| U0184:00 | Lost Communication With Radio: No Sub Type Information | Go To PINPOINT TEST AX |
| U0198:00 | Lost Communication With Telematic Control Module: No Sub Type Information | Go To PINPOINT TEST AY |
| U0238:00 | Lost Communication With Digital Audio Control Module "D": No Sub Type Information | Go To PINPOINT TEST BA |
| U023B:00 (Only if equipped with 360 degree view camera system) | Lost Communication With Image Processing Module B: No Sub Type Information | Go To PINPOINT TEST BB |
| U024B:00 (Only if equipped with multi-contour seats) | Lost Communication with Seat Control Module "G": No Sub Type Information | Go To PINPOINT TEST BC |
| U024C:00 (Only if equipped with multi-contour seats) | Lost Communication with Seat Control Module "H": No Sub Type Information | Go To PINPOINT TEST BD |
| U0256:00 | Lost Communication With Front Controls Interface Module "A": No Sub Type Information | Go To PINPOINT TEST BF . |
| U0415:00 | Invalid Data Received From Anti-Lock Brake System (ABS) Control Module: No Sub Type Information | RETRIEVE and FOLLOW Diagnostic Trouble Codes (DTCs) present in the ABS module. REFER to: Anti-Lock Brake System (ABS) and Stability Control .* If no Diagnostic Trouble Codes (DTCs) are present in the ABS module, DIAGNOSE the observable symptom. |
| U0422:00 | Invalid Data Received From Body Control Module: No Sub Type Information | RETRIEVE and FOLLOW Diagnostic Trouble Codes (DTCs) present in the BCM. REFER to: Body Control Module (BCM) .* If no Diagnostic Trouble Codes (DTCs) are present in the BCM, DIAGNOSE the observable symptom. |
| U0423:00 | Invalid Data Received From Instrument Panel Cluster Control Module: No Sub Type Information | RETRIEVE and FOLLOW Diagnostic Trouble Codes (DTCs) present in the IPC. REFER to: Instrumentation, Message Center and Warning Chimes .* If no Diagnostic Trouble Codes (DTCs) are present in the IPC, DIAGNOSE the observable symptom. |
| U0452:00 | Invalid Data Received From Restraints Control Module: No Sub Type Information | RETRIEVE and FOLLOW Diagnostic Trouble Codes (DTCs) present in the RCM. REFER to: Airbag Supplemental Restraint System (SRS) .* If no Diagnostic Trouble Codes (DTCs) are present in the RCM, DIAGNOSE the observable symptom. |
| U1018:00 (Only if equipped with a CD player) | Lost Communication With Generic Function Module: No Sub Type Information | Go To PINPOINT TEST BG . |
| U1A00:87 | Private Communication Network: Missing Message | For a satellite radio concern, GO to Pinpoint Test B For a SIRIUS Travel Link concern, GO to Pinpoint Test C For a navigation concern, Go To PINPOINT TEST AK . For a compass concern, Go To PINPOINT TEST AM . |
| U2017:45 | Control Module Software #2: Program Memory Failure | CLEAR all Continuous Memory Diagnostic Trouble Codes (CMDTCs). WAIT at least 10 seconds. RETRIEVE all Continuous Memory Diagnostic Trouble Codes (CMDTCs). If DTC U2017:45 is retrieved again, PERFORM the APIM Hardware Test. Refer to APIM HARDWARE TESTING . |
| U2017:51 | Control Module Software #2: Not Programmed | This DTC sets due to an incorrect or incomplete APIM programming/provisioning. Using a diagnostic scan tool, PERFORM the APIM programming procedure. REFER to: SYNC Module [APIM] Programming . |
| U2017:52 | Control Module Software #2: Not Activated | This DTC sets due to an incorrect or incomplete APIM programming/provisioning. Using a diagnostic scan tool, PERFORM the APIM programming procedure. REFER to: SYNC Module [APIM] Programming . |
| U2017:54 | Control Module Software #2: Missing Calibration | This DTC sets due to an incorrect or incomplete APIM programming/provisioning. Using a diagnostic scan tool, PERFORM the APIM programming procedure. REFER to: SYNC Module [APIM] Programming . |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | This DTC sets due to an incorrect or incomplete APIM programming/provisioning. Using a diagnostic scan tool, PERFORM the APIM programming procedure. REFER to: SYNC Module [APIM] Programming . |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | This DTC sets due to an incorrect or incomplete APIM programming/provisioning. Using a diagnostic scan tool, PERFORM the APIM programming procedure. REFER to: SYNC Module [APIM] Programming . |
| U3000:04 | Control Module: System Internal Failure | CLEAR all Continuous Memory Diagnostic Trouble Codes (CMDTCs). WAIT at least 10 seconds. RETRIEVE all Continuous Memory Diagnostic Trouble Codes (CMDTCs). If DTC U3000:04 is retrieved again, PERFORM the APIM Hardware Test. Refer to APIM HARDWARE TESTING . |
| U3000:09 | Control Module: Component Failure | CLEAR all Continuous Memory Diagnostic Trouble Codes (CMDTCs). WAIT at least 10 seconds. RETRIEVE all Continuous Memory Diagnostic Trouble Codes (CMDTCs). If DTC U3000:09 is retrieved again, PERFORM the APIM Hardware Test. Refer to APIM HARDWARE TESTING . |
| U3000:41 | Control Module: General Checksum Failure | CLEAR the DTC. WAIT at least 10 seconds. REPEAT the APIM self-test. If DTC U3000:41 is retrieved again, PERFORM the APIM Hardware Test. Refer to APIM HARDWARE TESTING . |
| U3000:88 | Control Module: Bus Off |
NOTE:
The module was unable to communicate on the network at a point in time. The fault is not currently present since the module had to communicate with the diagnostic scan tool to report this DTC. To avoid repeat network concerns: INSPECT for damaged or corroded wiring at the APIM. Refer to Module Communications Network
for schematic and connector information.CLEAR all Continuous Memory Diagnostic Trouble Codes (CMDTCs).WAIT at least 10 seconds.REPEAT the network test with the diagnostic scan tool. |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | Go To PINPOINT TEST BH . |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | Go To PINPOINT TEST BI . |