Possible Causes

WARNING: This page is about a different car, the 2020 Lincoln Continental, 2019 Lincoln Continental, and 2018 Lincoln Continental. However, it is still accessible from the selected car via links, so may be relevant.

Calibration routine not complete
ABS module

AK1: CARRY OUT THE ABS MODULE/HCU CALIBRATION

Ignition ON, engine OFF.
Using a diagnostic scan tool, carry out the Inlet Valve Calibration and then the Master Cylinder Isolation Calibration.
Clear the ABS DTCs.
Ignition OFF.
Ignition ON, engine OFF.
Carry out the ABS self-test.

Is DTC B10DF:46 still present?

Yes	No
Go to AK2.	The systems is operating correctly. The concern was caused by an incomplete calibration.

AK2: CHECK FOR CORRECT ABS MODULE OPERATION

Ignition OFF.
Ignition ON, engine OFF.
Using a diagnostic scan tool, carry out the Inlet Valve Calibration and then the Master Cylinder Isolation Calibration.
Carry out the ABS self-test.

Is DTC B10DF:46 still present?

Yes	No
INSTALL a new ABS module. CHECK OASIS for any applicable service articles: TSB, GSB, SSM or FSA. If a service article exists for this concern, DISCONTINUE this test and FOLLOW the service article instructions. If no service articles address this concern, INSTALL a new ABS module. REFER to Anti-Lock Brake System (ABS) and Stability Control article. ORDER a replacement ABS module and INCLUDE the RVC on the form. If this is a Ford paid repair, INCLUDE the RVC on the warranty claim form. RETURN to the PTS web site.	The systems is operating correctly. The concern was caused by an incomplete calibration. If this is a Ford paid repair, INCLUDE the RVC on the warranty claim form. RETURN to the PTS web site.

Yes

INSTALL a new ABS module.
CHECK OASIS for any applicable service articles: TSB, GSB, SSM or FSA.
If a service article exists for this concern, DISCONTINUE this test and FOLLOW the service article instructions.
If no service articles address this concern, INSTALL a new ABS module. REFER to Anti-Lock Brake System (ABS) and Stability Control article.
ORDER a replacement ABS module and INCLUDE the RVC on the form.
If this is a Ford paid repair, INCLUDE the RVC on the warranty claim form.
RETURN to the PTS web site.

The systems is operating correctly. The concern was caused by an incomplete calibration.
If this is a Ford paid repair, INCLUDE the RVC on the warranty claim form.
RETURN to the PTS web site.

AK3: CHECK FOR CORRECT ABS OPERATION

Ignition OFF.
Ignition ON, engine OFF.
Using a diagnostic scan tool, carry out the Inlet Valve Calibration and then the Master Cylinder Isolation Calibration.
Carry out the ABS self-test.

Is DTC B10DF:46 still present?

Yes	No
INSTALL a new ABS module. CHECK OASIS for any applicable service articles: TSB, GSB, SSM or FSA. If a service article exists for this concern, DISCONTINUE this test and FOLLOW the service article instructions. If no service articles address this concern, INSTALL a new ABS module and HCU assembly. REFER to Anti-Lock Brake System (ABS) and Stability Control article. ORDER a replacement ABS module and HCU assembly. INCLUDE the RVC on the form. If this is a Ford paid repair, INCLUDE the RVC on the warranty claim form. RETURN to the PTS web site.	The systems is operating correctly. The concern was caused by an incomplete calibration. If this is a Ford paid repair, INCLUDE the RVC on the warranty claim form. RETURN to the PTS web site.

Yes

INSTALL a new ABS module.
CHECK OASIS for any applicable service articles: TSB, GSB, SSM or FSA.
If a service article exists for this concern, DISCONTINUE this test and FOLLOW the service article instructions.
If no service articles address this concern, INSTALL a new ABS module and HCU assembly. REFER to Anti-Lock Brake System (ABS) and Stability Control article.
ORDER a replacement ABS module and HCU assembly. INCLUDE the RVC on the form. If this is a Ford paid repair, INCLUDE the RVC on the warranty claim form.
RETURN to the PTS web site.

The systems is operating correctly. The concern was caused by an incomplete calibration.
If this is a Ford paid repair, INCLUDE the RVC on the warranty claim form.
RETURN to the PTS web site.