Pinpoint Test C : The BCM Does Not Respond To The Scan Tool: Notes

WARNING: This page is about a different car, the 2018 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.

Diagnostic Overview

Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to Diagnostic Methods in Service Information for information about these practices.

Refer to Grounds , for schematic and connector information.

Refer to Power Distribution/BCM , for schematic and connector information.

Refer to Module Communications Network , for schematic and connector information.

Normal Operation and Fault Conditions

The Body Control Module (BCM) communicates with the scan tool through the High Speed Controller Area Network (HS-CAN) and communicates with the other modules through the Medium Speed Controller Area Network (MS-CAN).

Visual Inspection and Diagnostic Pre-checks

Verify high current BJB fuse 1 (100A) is OK.