Pinpoint Test F : The RCM Does Not Respond To The Scan Tool: Notes
WARNING: This page is about a different car, the 2018 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.
Diagnostic Overview
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to Diagnostic Methods in Service Information for information about these practices.
Refer to Module Communications Network , for schematic and connector information.
Refer to Supplemental Restraint System , for schematic and connector information.
Normal Operation and Fault Conditions
The Restraints Control Module (RCM) communicates with the scan tool through the High Speed Controller Area Network (HS-CAN).
Visual Inspection and Diagnostic Pre-checks
Verify BCM fuse 41 (7.5A) is OK.