Normal Operation and Fault Conditions
The RCM continuously monitors the passenger seatbelt buckle switch circuit for the following faults:
- Open circuit
- Short to voltage
- Short to ground
- Current out of range
- Faulted passenger seatbelt buckle switch
If a fault is detected, the RCM stores DTC B0052:11, B0052:12, B0052:13 or B0052:1D in memory and sends a message to the IPC to illuminate the airbag warning indicator.
PPT G RCM DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B0052:11 | Passenger Seatbelt Sensor: Circuit Short to Ground | Sets when the RCM senses a short to ground from the passenger seatbelt buckle sensor circuit for more than 6 seconds. |
| B0052:12 | Passenger Seatbelt Sensor: Circuit Short to Battery | Sets when the RCM senses a short to voltage from the passenger seatbelt buckle sensor circuit for more than 6 seconds. |
| B0052:13 | Passenger Seatbelt Sensor: Circuit Open | Sets when the RCM senses an open from either passenger seatbelt buckle sensor circuit for more than 6 seconds. |
| B0052:1D | Passenger Seatbelt Sensor: Circuit Current Out of Range | Sets when the RCM measures current outside of an acceptable range from the passenger seatbelt buckle sensor circuit for more than 6 seconds. |