Powertrain Control Module (PCM): Installation

To install, reverse the removal procedure.
NOTE: This step is only necessary when installing a new component.

Upload the module information from the diagnostic tool using the Programmable Modules Installation routine. Use the General Equipment: Ford Diagnostic Equipment
- Upload the module information from the diagnostic tool using the Programmable Modules Installation routine.
- Refer to: Module Configuration - System Operation and Component Description .
- Reprogram the PATS. Carry out the Parameter Reset procedure. Refer to: Anti-Theft Key Programming - Scan Tool .
After completing the repairs, perform the Misfire Monitor Neutral Profile Correction procedure.