| U0146:00 |
Lost Communication With Gateway "A": No Sub Type Information |
GO to Pinpoint Test AA |
| U0401:00 |
Invalid Data Received from ECM/PCM A: No Sub Type Information |
DIAGNOSE all non-network Diagnostic Trouble Codes (DTCs) from the PCM. Refer to the appropriate engine article for the procedure. |
| U0401:82 |
Invalid Data Received from ECM/PCM A: Alive / Sequence Counter Incorrect / Not Updated |
DIAGNOSE all non-network Diagnostic Trouble Codes (DTCs) from the PCM. Refer to the appropriate engine article for the procedure. |
| U1A00:00 |
Private Communication Network: No Sub Type Information |
GO to Pinpoint Test AB |
| U2100:00 |
Initial Configuration Not Complete: No Sub Type Information |
PERFORM the PMI using as-built data. CLEAR the Diagnostic Trouble Codes (DTCs) and REPEAT the self-test. If the DTC returns, INSTALL a new RTM. REFER to: Radio Transceiver Module (RTM)
. |
| U3000:04 |
Control Module: System Internal Failure |
INSTALL a new RTM. REFER to: Radio Transceiver Module (RTM)
. |