Module COMMMUNICATIONS Network DTCS
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
| DTC | Description | Action |
|---|---|---|
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | CHECK the vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect PMI procedures. INSTALL As-Built data from Professional Technician Society (PTS) following diagnostic scan tool instructions under Module Programming>As-Built. |
| U3000:44 | Control Module: Data Memory Failure | RETRIEVE all Continuous Memory Diagnostic Trouble Codes (CMDTCs). If DTC U3000:44 is retrieved, INSTALL a new GWM. REFER to: Gateway Module A (GWM) . If DTC U3000:44 is not retrieved, the module is operating correctly at this time. The concern may have been caused by an intermittent concern. |
| U3000:45 | Control Module: Program Memory Failure | RETRIEVE all Continuous Memory Diagnostic Trouble Codes (s). If DTC U3000:45 is retrieved, INSTALL a new GWM. REFER to: Gateway Module A (GWM) . If DTC U3000:45 is not retrieved, the module is operating correctly at this time. The concern may have been caused by an intermittent concern. |
| U3000:49 | Control Module: Internal Electronic Failure | RETRIEVE all Continuous Memory Diagnostic Trouble Codes (CMDTCs). If DTC U3000:49 is retrieved, INSTALL a new GWM. REFER to: Gateway Module A (GWM) . If DTC U3000:49 is not retrieved, the module is operating correctly at this time. The concern may have been caused by an intermittent concern. |