LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2019 >> MKZ Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1050 (Module Communications Network) >> Diagnosis And Testing >> Communications Network >> Pinpoint Tests >> Pinpoint Test P : The Rear Audio Control Module (RACM) Does Not Respond To The Diagnostic Scan Tool >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test P : The Rear Audio Control Module (RACM) Does Not Respond To The Diagnostic Scan Tool: Notes

WARNING: This page is about a different car, the 2018 Lincoln Continental. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Module Communications Network for schematic and connector information.

Refer to Audio System/Navigation - Harman Revel Ultima Audio System for schematic and connector information.

Normal Operation and Fault Conditions 

The RACM communicates on the HS-CAN3, and communicates with the diagnostic scan tool through the HS-CAN2. Diagnostic messages are sent/received through the HS-CAN2 circuits at the DLC, and translated through the GWM to the HS-CAN3.

Possible Sources 

Visual Inspection and Diagnostic Pre-checks 

Verify BCM fuse 9 (10A) is OK.

scientia non olet · About LEMON Manuals