LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2019 >> Navigator Select, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Four-Wheel Drive Systems) >> Diagnosis And Testing >> Four-Wheel Drive Systems - Vehicles With: 2-Speed Torque On Demand Transfer Case >> Pinpoint Tests >> Pinpoint Test B : DTC U300D:11 >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test B : DTC U300D:11: Notes

WARNING: This page is about a different variant/trim than selected.

Refer to Wiring Diagram Four Wheel Drive Systems for schematic and connector information.

Normal Operation and Fault Conditions 

The TCCM receives ignition switch position status from the hardwired run/start input to TCCM and the ignition switch position status message communicated by the IPC over the HS-CAN. The ignition switch position status message originates from the BCM which communicates the ignition switch position status over the MS-CAN. The IPC acts as a gateway module, transferring the ignition switch status message from MS-CAN to HS-CAN. For information regarding network messaging, REFER to: Communications Network - System Operation and Component Description . .

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
U300D:11 Ignition Input On/Start: Circuit Short To Ground Ignition Input On/Start: Circuit Short To Ground

Possible Sources 

scientia non olet · About LEMON Manuals