Pinpoint Test G : U1000:00: Notes
WARNING: This page is about a different car, the 2020 Lincoln Aviator. However, it is still accessible from the selected car via links, so may be relevant.
Normal Operation and Fault Conditions
The BCMC uses solid state drivers to control the output of several systems. When an overload occurs on any of these drivers, the BCMC disables the output and tracks the number of repetitive faults on each of these circuits. The module compares this number of overloads to 3 progressive thresholds established for each circuit. At each threshold, DTC U1000:00 sets along with the DTC associated with the affected circuit. For additional information, REFER to: Module Controlled Functions - Overview .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Condition |
|---|---|---|
| BCMC U1000:00 | Solid State Driver Protection Active -Driver Disabled: No Sub Type Information | A continuous memory DTC that sets when the BCMC has disabled a circuit due to a repetitive circuit overload and a progressive threshold is met. |
Possible Sources
- BCMC