Memory Set Switch

The memory set switch contains 3 momentary contact switches. It is hard-wired to the DDM and is used to save or recall up to 3 memory positions. The DDM and PDM recall the requested memory preset mirror position from internal memory or save the current mirror position to correspond with the requested preset. When the memory set switch (1, 2 or 3) is activated, the DDM sends this message to the DSM to indicate the status of each memory set switch button (pressed or not pressed). For additional information on the memory set switch, Refer to: Front Seats .

For additional information on memory recall or memory save, refer to the Owner's Literature.