| BCM |
B1554:11 |
Wireless Accessory Charger Enable/Disable: Circuit Short To Ground |
GO to Pinpoint Test A |
| BCM |
B1554:13 |
Wireless Accessory Charger Enable/Disable: Circuit Open |
GO to Pinpoint Test A |
| WACM |
P150E:96 |
Electronic Control Module Cooling Fan Circuit: Component Internal Failure |
GO to Pinpoint Test B |
| WACM |
U0140:00 |
Lost Communication With Body Control Module: No Sub Type Information |
GO to Pinpoint Test E |
| WACM |
U0184:00 |
Lost Communication With Radio: No Sub Type Information |
GO to Pinpoint Test F |
| WACM |
U0253:00 |
Lost Communication With Accessory Protocol Interface Module: No Sub Type Information |
GO to Pinpoint Test G |
| WACM |
U201A:51 |
Control Module Main Calibration Data: Not Programmed |
GO to Pinpoint Test H |
| WACM |
U2100:00 |
Initial Configuration Not Complete: No Sub Type Information |
GO to Pinpoint Test H |
| WACM |
U3000:41 |
Control Module: General Checksum Failure |
GO to Pinpoint Test C |
| WACM |
U3000:42 |
Control Module: General Memory Failure |
GO to Pinpoint Test C |
| WACM |
U3000:49 |
Control Module: Internal Electronic Failure |
GO to Pinpoint Test C |
| WACM |
U3003:16 |
Battery Voltage: Circuit Voltage Below Threshold |
GO to Pinpoint Test D |
| WACM |
U3003:17 |
Battery Voltage: Circuit Voltage Above Threshold |
GO to Pinpoint Test D |