LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1988 >> 323 GT >> Repair and Diagnosis >> Engine Performance >> System >> EGI Control System >> Diagnosis & Testing >> Component Testing >> Throttle Sensor (Turbo)
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Throttle Sensor (Turbo)

  1. Remove rubber boot from throttle sensor. See Fig 1 . With ignition on, check voltage between each terminal and ground. See THROTTLE SENSOR VOLTAGE  table. Repeat test with throttle wide open.
    Fig 1: Throttle Sensor Connector Identification
    G94798Courtesy of MAZDA MOTORS CORP.
    THROTTLE SENSOR VOLTAGE (323 TURBO)

    Termina Codes Closed Volts Wide Open Volts
    A 0.3-0.7 Approx. 4.0
    B Less Than 1.5 Less Than 1.5
    C 4.5-5.5 4.5-5.5
    D Less Than 1.5 Approx. 12.0
  2. If not correct at terminal D only, check throttle sensor adjustment. If not correct at terminals A, B or C, check resistance. If resistance is okay, check voltage at ECU connector terminals No. 2A, 2C and 2E.
THROTTLE SENSOR RESISTANCE (323 TURBO)

Terminal Closed Throttle Wide Open Throttle
A-B Approx. 500 ohms Approx. 4500 ohms
B-C 3000-7000 ohms 7000
NOTE: All procedures are made with engine at normal operating temperature.
scientia non olet · About LEMON Manuals