LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1988 >> RX-7 Turbo >> Repair and Diagnosis >> Engine Performance >> System >> CEC System >> Component Testing >> System Components >> Airflow Meter
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Airflow Meter

  1. Intake air temperature sensor and fuel pump switch are contained in the airflow meter. Determine terminal identification. See Fig 1 .
  2. Using ohmmeter, measure resistance between designated terminals. See AIRFLOW METER RESISTANCE  table. Reading must be within specification.
    AIRFLOW METER RESISTANCE

    Terminals Ohms Temperature
    E2 & Vs - Non-Turbo 50-500 N/A
    E2 & Vs - Turbo 200-600 N/A
    E2 & Vref - Non-Turbo 200-500 N/A
    E2 & Vref - Turbo 200-400 N/A
    E2 & THAa (1) 10,000-20,000 -4°F (-20°C)
    E2 & THAa (1) 4000-7000 32°F (0°C)
    E2 & THAa (1) 2000-3000 68°F (20°C)
    E2 & THAa (1) 900-1300 104°F (40°C)
    E2 & THAa (1) 400-700 140°F (60°C)
    E1 & Fc Infinity N/A
    (1) Intake air temperature sensor.
  3. Ensure measuring plate moves freely in airflow meter. Remaining terminals must be checked for fuel pump switch and measuring plate resistances. See Fig 1 . Attach ohmmeter to specified terminals to check fuel pump switch and measuring plate resistance. See FUEL PUMP SWITCH & PLATE RESISTANCE  table.
FUEL PUMP SWITCH & PLATE RESISTANCE

Terminals Ohms Plate Position
E1 & Fc Infinity Fully Closed
E1 & Fc 0 Fully Open
E2 & Vs 50-500 Fully Closed
E2 & Vs 50-500 Fully Open
Fig 1: Check Airflow Meter Resistance & Terminal Identification
G94862Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals