LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1989 >> 323 LX, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (System/Component Tests) >> Emission Systems & Sub-Systems >> Deceleration Control System >> Dashpot Adjustment (Turbo)
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Dashpot Adjustment (Turbo)

WARNING: This page is about a different car, the 1989 Mazda RX-7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Operate engine to normal operating temperature. Stop engine and remove intercooler. Disconnect throttle sensor connector.
  2. Using ohmmeter, check resistance between terminals "A" and "B" of throttle sensor connector. See Fig 1 . Resistance should be 1800-3800 ohms when dashpot rod moves from throttle lever.
  3. Loosen lock nut and adjust dashpot to obtain correct resistance reading. Reinstall throttle sensor connector and intercooler.
Fig 1: Checking Dashpot Adjustment
G117796Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals