LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1990 >> 323 Base, Standard >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System - Power >> Testing >> Pump Fluid Pressure Test
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Pump Fluid Pressure Test

  1. Disconnect pressure hose and connect pressure gauge/valve between steering pump and steering gear. See Figure . Bleed air from system.
  2. Open valve fully. Start engine and idle. Turn steering wheel (lock-to-lock) to increase fluid temperature to 122-140°F (50-60°C). To measure pump fluid pressure, close gauge valve completely.
  3. Increase engine speed to 1000-1500 RPM. Ensure pump pressure is within specification. See HYDRAULIC SYSTEM FLUID PRESSURE SPECIFICATIONS  table. If pressure is not within specification, replace pump.
CAUTION: DO NOT leave gauge valve closed for more than 15 seconds or pump may be damaged.
scientia non olet · About LEMON Manuals