LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1991 >> RX-7 Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Removal & Installation >> Fuel Pump >> Installation (MPV)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation (MPV)

  1. Replace fuel hose between pump and outlet pipe (DO NOT  apply excessive force when installing onto pump nipple). Install hose clamps so each clamp is located .10" (3 mm) from end of hose and hose clamp tabs are positioned around circumference of hose as specified in illustration. See Figure .
  2. Install pump with terminals positioned in relation to assembly frame as specified in illustration. To install remaining components, reverse removal procedure.
scientia non olet · About LEMON Manuals