LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1992 >> 323 Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Line Connectors (NAVAJO) >> Disconnect (Spring Lock Coupler)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Disconnect (Spring Lock Coupler)

  1. Release fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE. Remove locking (safety) clip (if equipped). Place Spring Lock Coupler Releaser (49-UN01-051 for 3/8" line; 49-UN01-052 for 1/2" line) over fuel line coupler. See Fig 1 .
  2. Push spring lock coupler releaser to release female fitting from garter spring. Pull spring lock coupler apart. Remove releaser.
    Fig 1: Disconnecting Spring Lock Coupler (Navajo)
    G113233Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals