LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1992 >> 626 DX, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Controls - Adjustments >> Idle Speed & Mixture >> Idle Speed >> MPV
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Idle Speed: MPV

  1. Connect jumper wire between ground and Green 1-pin test connector in left front corner of engine compartment. See Figure or Figure . On 2.6L, connect tachometer to White 1-pin test connector in left front corner of engine compartment.
  2. On 3.0L, connect tachometer to test connector at ignition coil (White wire). On all models, if idle speed is not within specification, rotate idle air adjusting screw on throttle body. See the IDLE SPEED SPECIFICATIONS  table. Disconnect jumper wire.
scientia non olet · About LEMON Manuals