LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1993 >> 323 Base, 1.6 2, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Crank Angle Sensor >> Removal & Installation (RX7)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation (RX7)

Disconnect negative battery cable. Remove drive belt. Remove crankshaft pulley and crank angle sensor plate. Remove nuts and sensor bracket. Disconnect electrical connectors. Remove crank angle sensors. To install, reverse removal procedure. Tighten sensor mounting nuts to specification. See TORQUE SPECIFICATIONS  table.

scientia non olet · About LEMON Manuals