LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1993 >> MX-6 Base, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel System Priming >> Except Navajo
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Except Navajo

  1. On B2200 PFI, B2600i, and MPV, connect jumper wire between terminals of Yellow 2-pin connector. See FUEL PUMP TEST CONNECTOR LOCATION  table.
  2. On all others, connect jumper wire between GND and F/P terminals of data link connector. See Figure . On all models, turn ignition on for about 10 seconds and then off. Disconnect jumper wire.