LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1993 >> Protege LX, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel System Priming >> Except Navajo
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Except Navajo

  1. On B2200 PFI, B2600i, and MPV, connect jumper wire between terminals of Yellow 2-pin connector. See FUEL PUMP TEST CONNECTOR LOCATION  table.
  2. On all others, connect jumper wire between GND and F/P terminals of data link connector. See Figure . On all models, turn ignition on for about 10 seconds and then off. Disconnect jumper wire.
scientia non olet · About LEMON Manuals