LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1994 >> 626 ES, Standard >> Repair and Diagnosis >> Steering >> Manual Steering >> Steering System - Power >> Testing >> Hydraulic System Pressure Test >> Gear Fluid Pressure Test
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Gear Fluid Pressure Test

  1. Ensure steering pump pressure is within specification. To measure steering gear fluid pressure, open gauge valve completely. Increase engine speed to 1000-1500 RPM.
  2. Turn steering wheel from lock to lock. Measure steering gear fluid pressure. Ensure gear pressure is within specification. See HYDRAULIC SYSTEM FLUID PRESSURE SPECIFICATIONS  table. If pressure is not within specification, replace gear.
HYDRAULIC SYSTEM FLUID PRESSURE SPECIFICATIONS (1)

Application psi (kg/cm2 )
MX-6 & 626 1209-1280 (85-90)
(1) Specifications are measured at 1000-1500 RPM, with fluid temperature at 122-140°F (50-60°C).
scientia non olet · About LEMON Manuals