LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1994 >> 929 >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> System Testing >> Initiating Inspection Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Initiating Inspection Mode

  1. Leave electrical connector attached to cruise control unit.
    NOTE: There is no wire in terminal "D" of cruise control unit connector. Push test light probe through connector cavity until probe contacts terminal on cruise control unit.
  2. On all models, shift transmission into Drive or Reverse (any gear except Neutral on M/T). Turn ignition on. Ensure main switch is off (cruise indicator light must be off). Simultaneously activate RESUME switch and turn main switch on. Ensure cruise indicator light illuminates. Inspection mode is now initiated. Go to INSPECTION CODE DIRECTORY.
scientia non olet · About LEMON Manuals