LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1994 >> B3000 Base, 2D Pickup, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes >> Quick Test >> Continuous Monitor Mode (Wiggle Test) >> KOEO Wiggle Test
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

KOEO Wiggle Test

1)  Connect test equipment. Turn ignition on. Activate self-test using jumper lead or diagnostic tester. Wait 10 seconds, then deactivate and reactivate self-test. Wiggle test mode is now activated. Tap, move and wiggle suspect sensor and/or harness area.

2)  If a fault is detected, scan tester should indicate a tone or light, and VOM will perform needle sweep and/or MIL will come on. A service code may be stored in continuous memory. Retrieve code, and perform appropriate test. See SERVICE CODE REFERENCE.

scientia non olet · About LEMON Manuals