LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1996 >> B3000 Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Engine Sensors & Switches >> Differential Pressure Feedback EGR (DPFE) Sensor
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Differential Pressure Feedback EGR (DPFE) Sensor

  1. Connect New Generation Star (NGS) Tool (49 T088 0A0) to data link connector 2 located under left side of dash. Start engine and warm to normal operating temperature. Operate at idle. Using NSG tool, access DPFEGR PID and record value. See DIFFERENTIAL PRESSURE FEEDBACK EGR (DPFE) SENSOR VOLTAGE TABLE  . If DPFEGR PID value is not as specified, go to next step.
  2. Turn ignition on. Using NSG tool, access DPFEGR PID. Disconnect tubes from DPFE sensor. Connect hand pump to intake manifold side of DPFE sensor. Apply vacuum and record value. See DIFFERENTIAL PRESSURE FEEDBACK EGR (DPFE) SENSOR VOLTAGE TABLE  . If DPFEGR PID value is not as specified, replace DPFE sensor.
DIFFERENTIAL PRESSURE FEEDBACK EGR (DPFE) SENSOR VOLTAGE

Condition PID Voltage
Ignition On .5
Hot Idle .5
Driving 30 MPH .5-.9
Driving 55 MPH 1.0-1.7
scientia non olet · About LEMON Manuals