LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1996 >> B3000 SE, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Line Connectors >> Disconnect (Spring Lock Coupler)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Disconnect (Spring Lock Coupler)

  1. Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE  . Remove locking (safety) clip (if equipped). Place Spring Lock Coupler Releaser (49-UN01-051 for 3/8" line; 49-UN01-052 for 1/2" line) over fuel line coupler. See Figure .
  2. Push spring lock coupler releaser to release female fitting from garter spring. Pull spring lock coupler apart. Remove releaser.
scientia non olet · About LEMON Manuals