Solenoid Valves
Turn ignition off. Disconnect hydraulic unit 8-pin connector. Hydraulic unit is located in left front of engine compartment. Using ohmmeter, measure resistance between specified terminals of hydraulic unit connector. See Fig 1 . See HYDRAULIC UNIT CONNECTOR TERMINAL RESISTANCE . If resistance is not as specified, check wiring harness. If wiring harness is okay, replace hydraulic unit.
HYDRAULIC UNIT CONNECTOR TERMINAL RESISTANCE
| Terminals | Ohms |
|---|---|
| A & H | 3 |
| B & G | 3 |
| C & F | 3 |
| D & E | 3 |