LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1996 >> MX-6 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 546 (Starting System) >> Starter Inspection >> No Load Test
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

No Load Test

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that the battery is fully charged.
  2. Connect the starter, battery, voltmeter and ammeter as shown.
  3. Operate the starter and verify that it rotates smoothly.
  4. Measure the voltage and current while the starter is operating.
    • If not as specified, repair or replace the starter as necessary.
    Fig 1: Measuring Voltage And Current While Starter Is Operating
    G03699974Courtesy of MAZDA MOTORS CORP.

    Specification 

    VOLTAGE SPECIFICATION

    Voltage (V) 11
    Current (A) Below 90
scientia non olet · About LEMON Manuals