Throttle Position (TP) Sensor
WARNING: This page is about a different variant/trim than selected.
NOTE:
For information on connector terminal identification and test conditions specified in the following tables, see ADJUSTMENTS
- 2.3L article.
TP SENSOR CONTINUITY
| Condition (1) | Continuity Between Terminals "C" & "D" | ||
|---|---|---|---|
| .008" (.19 mm) | Yes | ||
| .015" (.37 mm) | No | ||
|
|||
TP SENSOR VOLTAGE
| Wire Color To ground | Closed Throttle Volts | WOT Volts | ||
|---|---|---|---|---|
| Yellow (3B) (1) | 0.1-1.0 | 2.8-4.5 | ||
|
||||