LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1997 >> B4000 Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Camshaft Position (CMP) Sensor >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

Note position of electrical connector on CMP sensor. Unplug harness connector from CMP sensor. Remove CMP sensor screws and CMP sensor. To install, reverse removal procedure. Tighten CMP sensor to specification. See TORQUE SPECIFICATIONS  .

scientia non olet · About LEMON Manuals