LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1997 >> MX-5 Miata Base, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Controls - Adjustments >> Throttle Position (TP) Sensor >> Throttle Position (TP) Sensor Continuity >> Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Throttle Position (TP) Sensor Continuity: Inspection

  1. Turn ignition off. Ensure throttle valve is in closed position. Disconnect TP sensor connector. Using an ohmmeter, check for continuity between terminals "A" and "B" at TP sensor. See Figure . Continuity should exist. If continuity exists, go to next step. If continuity does not exist, adjust TP sensor.
  2. Insert a .016" (.4 mm) feeler gauge between throttle lever and throttle stop screw. Check for continuity between terminals "A" and "B" of TP sensor connector. See Figure . Continuity should not exist. If continuity exists, adjust TP sensor.
scientia non olet · About LEMON Manuals