LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1997 >> MX-6 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing - 2.0L >> Ignition Checks >> Ignition Coil Resistance (2.0L M/T)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Coil Resistance (2.0L M/T)

  1. Disconnect distributor 3-pin connector. Using ohmmeter, measure primary resistance between terminals "A" and "B". See Figure and Figure . Resistance should be as specified. See IGNITION COIL RESISTANCE  table. If resistance is not as specified, replace distributor.
  2. Remove distributor cap. Using an ohmmeter, measure secondary resistance between terminal "A" and coil tower. See Figure and Figure . Resistance should be as specified. See IGNITION COIL RESISTANCE  table. If resistance is not as specified, replace distributor.
scientia non olet · About LEMON Manuals