LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1997 >> MX-6 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Controls - Remove/Install/Overhaul - 2.5L) >> Fuel System >> Fuel Pressure Regulator >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect negative battery cable. Release fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE  . Disconnect vacuum and fuel hose(s) from regulator. Remove regulator mounting bolts. Remove regulator, gasket and "O" ring (if equipped) from fuel rail.
  2. To install, reverse removal procedure. Using NEW gasket and "O" ring (if equipped). Tighten bolts to specification. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals