LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1997 >> MX-6 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Controls - Remove/Install/Overhaul - 2.5L) >> Ignition System >> Distributor >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

WARNING: This page is about a different variant/trim than selected.

Disconnect negative battery cable. Move any hoses, wiring or components interfering with distributor removal. Reference mark high tension wires to distributor cap and disconnect all wiring from distributor. Remove distributor cap. Remove hold-down bolt and distributor. To install, reverse removal procedure. Adjust ignition timing. See ADJUSTMENTS - 2.5L article.

scientia non olet · About LEMON Manuals