Ignition Timing

WARNING: This page is about a different variant/trim than selected.

IGNITION TIMING SPECIFICATIONS

Application ⁽¹⁾

Degrees BTDC @ RPM

M/T

9-11 @ 550-750

A/T ⁽²⁾

9-11 @ 550-750

⁽¹⁾	Connect a jumper wire between terminals TEN and GND of data link connector. See Fig 1 .

⁽²⁾	Place automatic transmission in Park.

Fig 1: Identifying Data Link Connector Terminals

Courtesy of MAZDA MOTORS CORP.